Studs and Bolts

Head Studs, Main Studs, Anchorlox, Turbo and manifold studs, flexplate bolts

Atomic Head Stud Washer Kit – M12 Oversize OD (28mm) | Ford Barra DOHC

$121.00 AUD

When you’re chasing big boost and big horsepower, you can’t afford to overlook the hardware that holds it all together. The Atomic M12 Oversize Head Stud Washer Kit is engineered to address a commo...

Atomic Barra Tool Steel Headstuds with OS Washers

from $550.00 AUD

Atomic Tool Steel Head Stud Kit – Ford Barra DOHC | 12mm Standard | Strongest in Class Description:The Ford Barra DOHC 4.0L is one of the most boost-hungry engines around — but factory head bolts s...

Atomic Harmonic Balancer Bolt Kit – Ford Barra 4.0L DOHC | High-Tensile + Nord-Lock Washer

$121.00 AUD

Atomic Harmonic Balancer Bolt Kit – Ford Barra 4.0L DOHC | High-Tensile + Nord-Lock Washer Description:Secure your harmonic balancer with confidence. The Atomic Harmonic Balancer Bolt Kit is engine...

Atomic SOHC INTECH H13 Tool Steel 12mm Headstud Kit

$550.00 AUD

Atomic Head Stud Kit – Ford SOHC Intech 6-Cyl | 12mm H13 Tool Steel | Ultra High Tensile Description:When you’re running boost or high cylinder pressure through your Ford SOHC Intech 6-cylinder eng...

$121.00 AUD

ARP flywheel bolts suit manual flywheel or Atomic #306720 chrome moly flexplate fitted to Ford DOHC 6 cyl. Set of 6 - M10/1.2

$55.00 AUD

Set of M10 flanged sump cross-bolts to suit Barra engines, all models.

$121.00 AUD

ARP hex head flexplate bolts suit standard or aftermarket Ford flexplates - AU Ford on. M10 x 1.25 x 20mm UHL. Set of 6 includ

Atomic Head Stud Washer Kit – M14 Oversize OD (28mm) | Ford Barra DOHC

$121.00 AUD

Atomic Head Stud Oversize Washer Kit – Ford Barra DOHC | 14.3mm Stud | 28mm OD | Hardened & Precision CNC Description:When pushing serious boost and cylinder pressure in high-power Barra builds...

Atomic Tool Steel Main Stud Kit – Ford Barra DOHC

$550.00 AUD

Atomic Tool Steel Main Stud Kit – Ford Barra DOHC | H13 Tool Steel | Complete Bottom-End Fastening Solution Description:When you're building a high-horsepower Barra, the bottom end needs to be lock...

$836.00 AUD

14.3mm H13 Tool Steel Correct length - bottoming tip which can be trimmed down if the stud sits too high (apparently some castings have shallow holes by ~10mm)H-13 Tool Steel 14.3mm Head stud kit s...